cGMP, GLP - FDA Approved, ISO-9001, ISO-14001, ISO/IEC 17025, ISO ISO-45001, HACCP, FSSC 22000, FSSAI, "REACH" Registered, Kosher & Halal Certified. We observe WHO Good manufacturing practice and Good laboratory practice.
Search for the supplies that you need here:
------Fumed Silica or Colloidal Silicon Dioxide USP NF BP Ph Eur FCC Food Grade Manufacturers
Anmol Chemicals Group, established in 1976, is the pioneer manufacturer of Specialty chemicals, Pharmaceutical Excipients, Fragrance & Flavor chemicals in India. Anmol Chemicals Group has manufacturing facilities spread across Western India, representatives in Houston Chicago USA, Dubai and UAE. We also have toll manufacturing units for processing chemicals in a few countries around the world. We make IP, BP, USP, Ph. Eur., FCC or Food Grade, Analytical Reagent Grade, LR or Laboratory Reagent Grade, Pure and Technical Grades of various chemicals. All our items are analyzed to meet the required standards. We can supply the material in grams for your laboratory trial and in tons for your plant scale jobs.
Our manufacturing facility is FDA approved and cGMP, GLP (FDA) Approved, ISO-9001, ISO-14001, ISO/IEC 17025, ISO OHSAS 18000, ISO 22000-2005 HACCP, FSSAI, FSSC-22000, certified. Apart from good manufacturing practice, we also follow good laboratory practice. We are offering products manufactured as per Kosher and Halal approved certified method. We are pre-registered with "Reach" for export to European countries. We can give all solid chemical materials as per specified size or shape. We observe WHO Good manufacturing practice and Good laboratory practice.
Fumed Silica or Colloidal Silicon Dioxide SDS of Manufacturers
Please visit Precipitated silica and also Fumed silica.
Synonyms: Fumed Silica or Colloidal Silicon Dioxide
CAS Number: 112945-52-5 or 7631-86-9, Molecular Weight: 60.08, Chemical Formula: SiO2, EINECS EC Number: 231-545-4, FEMA: ----,
Silicon dioxide is generally recognized as safe by the FDA. In the pharmaceutical industry, colloidal silicon dioxide is used in tablet-making, including use as an anti-caking agent, adsorbent, disintegrant, or glidant to allow powder to flow freely when tablets are processed.
Fumed silica also known as pyrogenic silica is a very fine particulate or colloidal form of silicon dioxide. It is prepared by burning SiCl4 in an oxygen-rich hydrogen flame to produce a "smoke" of SiO2.
Hydrophilic fumed silica is used with increasing success in high technology fields including pharmaceuticals, polyester, silicone, paints and coatings.
Hydrophobic fumed silica has a low moisture adsorption, excellent dispersibility, and ability to adjust rheological behavior, even that of polar systems.
Precipitated silica is an amorphous form of silica. It is a white, powdery material, produced by precipitation from a solution containing silicate salts. We offer it in various bulk density.亚洲VAV在线男人的天堂亚洲VAV在线男人的天堂,小野麻里亚教师在线观看小野麻里亚教师在线观看
There is some confusion about nomenclature of silica as Precipitated silica or Fumed silica. The readers are advised to study both these pages.
Specifications of Colloidal Silicon Dioxide USP NF Grade:
SiO2 --- 60.08
(This is a fumed silica grade.)
Colloidal Silicon Dioxide is a submicroscopic fumed silica prepared by the vapor-phase hydrolysis of a silicon compound. When ignited at 1000 for 2 hours, it contains not less than 99.0 percent and not more than 100.5 percent of SiO2.
Packaging and storage: Preserve in well-closed containers.
A: Transfer about 5 mg to a platinum crucible and mix with about 200 mg of anhydrous potassium carbonate. Ignite at a red heat over a burner for about 10 minutes, and cool. Dissolve the melt in 2 mL of freshly distilled water, warming if necessary, and slowly add 2 mL of ammonium molybdate to the solution: a deep yellow color is produced.
B: [Caution: Avoid contact with o-tolidine when performing this test, and conduct the test in a wellventilated hood.] Place 1 drop of the yellow silicomolybdate solution obtained in Identification test A on a filter paper and evaporate the solvent. Add 1 drop of a saturated solution of o-tolidine in glacial acetic acid to reduce the silicomolybdate to molybdenum blue, and place the paper over ammonium hydroxide: a greenish blue spot is produced.
pH: between 3.5 and 5.5, in a 1 in 25 dispersion.
Loss on drying: Dry it in a tared platinum crucible at 105 for 2 hours: it loses not more than 2.5% of its weight. Retain the dried specimen, in the crucible, for the test for Loss on ignition.
Loss on ignition: Ignite the portion of Colloidal Silicon Dioxide, retained from the test for Loss on drying, at 1000C ± 25C to constant weight: the previously dried Colloidal Silicon Dioxide loses not more than 2.0% of its weight.
Arsenic: To pass the test. The limit is 8 microg per g.
Assay: Transfer about 500 mg of Colloidal Silicon Dioxide to a tared platinum crucible, ignite at 1000C ± 25C for 2 hours, cool in a desiccator, and weigh. Add 3 drops of sulfuric acid and add enough alcohol to just moisten the sample completely. Add 15 mL of hydrofluoric acid, and in a well-ventilated hood evaporate on a hot plate to dryness, using medium heat (95C to 105C) and taking care that the sample does not spatter as dryness is approached. Heat the crucible to a red color with the aid of a Bunsen burner. Ignite the residue at 1000 ± 25 for 30 minutes, cool in a desiccator, and weigh. If a residue remains, repeat the procedure, beginning with “add 15 mL of hydrofluoric acid.” The weight lost by the assay specimen, previously ignited at 1000C± 25C, represents the weight of SiO2 in the portion taken.
Specifications of Hydrophobic Colloidal Anhydrous Silica BP Ph Eur Grade:
Colloidal silicon dioxide partly alkylated for hydrophobation.
Content: 99.0 per cent to 101.0 per cent SiO2 (ignited substance).
Appearance: White or almost white, light, fine, amorphous powder, not wet-able by water.
Solubility: Practically insoluble in water and mineral acids except hydrofluoric acid. It dissolves slowly in hot solutions of alkali hydroxides.
A. About 25 mg ignited in a platinum crucible at 900 ± 50C for 2 h gives the reaction of silicates.
B. Water-dispersible fraction (see Tests).
Chlorides: Maximum 250 ppm.
To 1.0 g add 30 mL of methanol and 20 mL of dilute nitric acid. Heat on a water-bath for 15 min stirring frequently. Cool, dilute to 50 mL with water and filter. Dilute 10 mL of the filtrate to 15 mL with water.
Water-dispersible fraction: Maximum 3.0 per cent.
Place 0.400 g in a 500 mL separating funnel, add 100 mL of water and shake for 1 min. Allow to stand for 1 h. Allow 90 mL of the aqueous phase to run out dropwise without filtration into a suitable dish dried at 140C and cooled in a desiccator. Evaporate to dryness at 140C, starting at a low temperature to avoid splashing. Cool in a desiccator. The residue weighs a maximum of 12 mg.
Loss on ignition: Maximum 6.0 per cent, determined on 0.200 g by ignition in a platinum crucible at 900 ± 50C for 2 h. It is advisable to place the crucible in a cold oven and then to heat up the oven. Allow to cool in a desiccator before weighing.
To the residue obtained in the test for loss on ignition add sufficient ethanol (96 per cent) to moisten the residue completely and 0.2 mL of sulfuric acid. Add 6 mL of hydrofluoric acid and evaporate to dryness on a hot-plate at about 100C, taking care to avoid loss from sputtering. Wash down the sides of the platinum crucible with 6 mL of hydrofluoric acid and evaporate to dryness. Ignite at 900 ± 50C, allow to cool in a desiccator and weigh.
The difference between the mass of the residue obtained in the test for loss on ignition and the mass of the final residue gives the amount of SiO2 in the quantity of the substance to be examined.
Specifications of Colloidal Anhydrous Silica BP Ph Eur Grade:
SiO2 --- 60.1 --- 7631-86-9
Action and use: Excipient.
亚洲VAV在线男人的天堂亚洲VAV在线男人的天堂,小野麻里亚教师在线观看小野麻里亚教师在线观看Content: 99.0 per cent to 100.5 per cent of SiO2 (ignited substance).
Appearance: White or almost white, light, fine, amorphous powder, with a particle size of about 15 nm.
Solubility: Practically insoluble in water and in mineral acids except hydrofluoric acid. It dissolves in hot solutions of alkali hydroxides.
About 20 mg gives the reaction of silicates.
pH: 3.5 to 5.5.
Chlorides: Maximum 250 ppm.
To 1.0 g add a mixture of 20 mL of dilute nitric acid and 30 mL of water and heat on a water-bath for 15 min, shaking frequently. Dilute to 50 mL with water if necessary, filter and cool. Dilute 10 mL of the filtrate to 15 mL with water.
Loss on ignition: Maximum 5.0 per cent, determined on 0.200 g by ignition in a platinum crucible at 900 ± 50C for 2 h. Allow to cool in a desiccator before weighing.
Specifications of Colloidal Hydrated Silica BP Ph Eur Grade:
Action and use: Excipient.
Colloidal hydrated silica produced by precipitation or gelation process.
Content: 98.0 per cent to 100.5 per cent of SiO2 (ignited substance).
Appearance: White or almost white, light, fine, amorphous powder.
Solubility: Practically insoluble in water and in mineral acids, with the exception of hydrofluoric acid. It dissolves in hot solutions of alkali hydroxides.
About 20 mg gives the reaction of silicates.
Solution S: To 2.5 g add 50 mL of hydrochloric acid and mix. Heat on a water-bath for 30 min, stirring from time to time. Maintain the original volume by adding dilute hydrochloric acid. Evaporate to dryness. Add to the residue a mixture of 8 mL of dilute hydrochloric acid and 24 mL of water. Heat to boiling and filter under reduced pressure through a sintered-glass filter (16). Wash the residue on the filter with a hot mixture of 3 mL of dilute hydrochloric acid and 9 mL of water. Wash with small quantities of water, combine the filtrate and washings and dilute to 50 mL with water.
pH: 4.0 to 7.0.
Suspend 1.0 g in 30 mL of a 75 g/L solution of potassium chloride.
Water-absorption capacity: In a mortar, triturate 5 g with 5 mL of water, added drop by drop. The mixture remains powdery.
Substances soluble in hydrochloric acid: Maximum 2.0 per cent.
In a platinum dish, evaporate to dryness 10.0 mL of solution S and dry to constant mass at 100-105C. The mass of the residue is not more than 10 mg.
Chlorides: Maximum 0.1 per cent.
Sulfates: Maximum 1 per cent.
Iron: Maximum 300 ppm.
Loss on ignition: Maximum 20.0 per cent, determined on 0.200 g in a platinum crucible by heating at 100-105 °C for 1 h and then at 900 ± 50 °C for 2 h.
Specifications of Silicon Dioxide FCC Food Grade:
Synthetic Amorphous Silica
SiO2 Formula wt 60.08
INS: 551 CAS: [7631-86-9]
Silicon Dioxide occurs as an amorphous substance that shows a noncrystalline pattern when examined by X-ray diffraction. It is produced synthetically, either by a vapor-phase hydrolysisprocess, yielding fumed silica, or by a wet process, yielding precipitated silica, silica gel, colloidal silica, or hydrous silica. Fumed silica is produced in an essentially anhydrous state, whereas the wet-process products are obtained as hydrates or contain surface-adsorbed water.
Fumed silica occurs as a white, fluffy, nongritty powder of extremely fine particle size and is hygroscopic. The wet process silicas occur as white, fluffy powders or as white, microcellular beads or granules and are hygroscopic or absorb moisture from the air in varying amounts. All these forms of Silicon Dioxide are insoluble in water and in organic solvents but they are soluble in hydrofluoric acid and in hot, concentrated solutions of alkalies.
Function: Anticaking agent; defoaming agent; carrier; conditioning agent; chillproofing agent in malt beverages; filter aid.
A. Place about 5 mg of sample into a platinum crucible, mix with 200 mg of anhydrous potassium carbonate and ignite over a burner at a red heat for about 10 min. Cool, dissolve the melt in 2 mL of freshly distilled water, warming if necessary, and slowly add 2 mL of ammonium molybdate. A deep yellow color appears.
B. Place 1 drop of the solution from Identification Test A on a filter paper and evaporate the solvent. Add 1 drop of a saturated solution of o-toluidine in glacial acetic acid and place the paper over ammonium hydroxide. A green-blue spot develops.
Assay: Fumed Silica: Not less than 99.0% of SiO2 after ignition; Precipitated Silica, Silica Gel, and Hydrous Silica: Not less than 94.0% of SiO2 after ignition.
Lead: Not more than 5 mg/kg.
Loss on Drying: Fumed Silica: Not more than 2.5%; Precipitated Silica and Silica Gel: Not more than 7.0%; Hydrous Silica: Not more than 70.0%; Colloidal Silica: Not more than 85.0%.
Loss on Ignition: Fumed Silica: Not more than 2.0% after drying; Silica Gel, Hydrous Silica, and Precipitated Silica: Not more than 8.5% after drying.
Soluble Ionizable Salts (as Na2SO4): Precipitated Silica, Silica Gel, and Hydrous Silica: Not more than 5.0%.
Taloja Mumbai and Ankleshwar, INDIA
Representatives in Houston, Chicago and New York, USA
TEL: (OFF) +91-22-23726950, +9123774610, +9123723564
Copyright and Usual Disclaimer is Applicable
Last updated 4-sep-20
Exporters to USA, Canada, UAE, Europe, South Africa, Tanzania, Kenya, Egypt, Turkey, Nigeria, Uganda, Brazil, Chile, Argentina, Dubai, Cameroon, Mexico, Brazil, Chile, Argentina, Korea, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, etc.
Representatives in New York, Houston - Texas, Chicago - Illinois, Los Angeles.
Fast Selling IP BP Ph Eur EP USP Analytical Reagent FCC Food Grades of Chemicals by Anmol Chemicals
Acetic Acid Glacial --- Aluminum Chloride --- Ammonium bicarbonate --- Ammonium Carbonate --- Ammonium Chloride --- Benzoic Acid --- Benzyl Alcohol --- Boric Acid --- Borax; Sodium Borate --- Calcium Butyrate --- Calcium Carbonate --- Calcium Chloride --- Calcium Hydroxide --- Calcium Saccharate --- Carbamide Peroxide --- Calcium Oxide --- Calcium Sulfate --- Chromic Chloride --- Copper Sulfate --- Cupric Chloride --- Ferric Chloride --- Fumaric Acid --- Magnesium Butyrate --- Magnesium Chloride --- Magnesium Sulfate --- Malic Acid --- Maleic Acid --- Manganese Chloride --- Manganese Sulfate --- Octyldodecanol --- Oleic acid --- Phenylethyl Alcohol --- Propylene Carbonate --- Potassium Bromide --- Potassium Bicarbonate --- Potassium Carbonate --- Potassium Chloride --- Potassium Hydroxide Pellets --- Potassium Alum --- Selenious Acid --- Sodium Acetate --- Sodium Butyrate --- Sodium Bicarbonate --- Sodium Chloride --- Sodium Molybdate --- Sodium Selenite --- Sodium Perborate --- Sodium Hydroxide --- Sodium Sulphate --- 亚洲VAV在线男人的天堂亚洲VAV在线男人的天堂,小野麻里亚教师在线观看小野麻里亚教师在线观看Sodium Sulfide --- Sodium Thiosulfate --- Urea --- Zinc Chloride --- Zinc Sulphate ---
Colloidal Silicon Dioxide BP Ph Eur USP NF FCC Food Grades Manufacturers